Screw pump BMP 6 230V
The BMP 6 screw pump is the universal device of choice for building renovation. This device is ideal for processing all mineral-based materials.
and bituminous products with a grain size of up to 2.0 mm by injection or spraying (borehole suspensions, sealing slurries,
Fine plasters, grouting mortar, joint mortar, thick coatings).
Products containing solvents should only be used after consultation with the manufacturer. For pure injection / backfilling, only
a 230 Volt / 50 Hz power connection is required. Depending on the product, a compressor with an air output of 150
ltr (low-viscosity media) up to 400 ltr (thick bitumen coating). A large selection of accessories enables use with
all packer systems available on the market. The material is conveyed via a rotor and stator. The
Delivery rate can be infinitely adjusted from 0.5 to 14 ltr / min. A remote control is optionally available.
Consisting of:
+ screw pump 0.5 – 14 ltr.
+ Chassis
+ hopper 30 ltr.
+ electric 2 gear motor with speed adjustment
+ Connection for e-remote control
+ Material connection GEKA
+ 2-speed continuously variable transmission
+ Without toolbox/manometer
| Weight | 25 kg |
|---|---|
| max capacity in ltr/min | 14 |
| Max. delivery distance | 30 |
| Max. delivery height | 10 |
| Motor in kW | 1, 8 |
| max. particle size in mm | 2 |
| Max. pressure in bar | 25 |
| Container volume in ltr. | 60 |
Downloads are currently still in development…..
