BMP6
-
Screw pump BMP 6 – Bypass – Spraying set I
BMP6Suitable for:
emulsion paint, plaster, filler and
Materials with small grain size.
Consisting of:
Screw pump BMP 6 240 V
Return flow regulator mounting kit
Material hose 1/2″ x 10 mtr. GEKA
Air hose 3/8″ x 11 Mtr.
Boiler gun K22 PS, nozzle 6 mm
ATTENTION: Without compressor -
Screw pump BMP 6 – Paint roller set
BMP6Suitable for: Facade paints, lime paints, emulsion paints, silicate paints, clay paints… The internally fed roller allows large surfaces to be coated quickly and easily. The BMP 6 paint roller set is particularly suitable for paints with a grain such as clay paints or lime paints.
-
Screw pump BMP 6 – Jointing set
BMP6Suitable for:
Grout up to 2 mm.
Consisting of:
Screw pump BMP 6 240 V
Material hose 1″ x 5 mtr. GEKA
Jointing set with ball valve and 5 nozzles
Radio remote control -
Screw pump BMP 6 – Automatic jointing set
BMP6Suitable for grouting natural stone walls, clinker bricks, floor joints… Simple and fast operation thanks to automatic mode.
-
Screw pump BMP 6 – Spraying set III
BMP6Suitable for:
Plaster, bitumen and other materials up to 2 mm grain size.
Consisting of:
Screw pump BMP 6 240 V
Material hose 1″ x 10 mtr. GEKA
Air hose 3/8″ x 11 Mtr.
Spray lance set with 5 nozzles
ATTENTION: Without compressor -
Screw pump BMP 6 – Grouting set I
BMP6Suitable for:
Silicates and sponge protection agents,
for injectors with cone head.
Consisting of:
Screw pump BMP 6 240 V
Material hose 1/2″ x 5 mtr. GEKA
Injection attachment with diaphragm seal,
Pressure gauge and 4-jaw grip
Radio remote control -
Screw pump BMP 6 – Verpress Set II
BMP6Suitable for:
Microcements and suspensions, for
Injectors with quick coupling.
Consisting of:
Screw pump BMP 6 240 V
Material hose 1/2″ x 5 mtr. GEKA
Attachment ND pliers with pressure regulator
Radio remote control -
Screw pump BMP 6 – Frame set
BMP6Suitable for:
For door frames and fire protection mortar
up to max. 2 mm.
Consisting of:
Screw pump BMP 6 240 V
Material hose 1″ x 5 mtr. GEKA
Wide slot nozzle, rotatable, GEKA
Radio remote control -
Screw pump BMP 6 230V
BMP6The BMP 6 screw pump is the universal device of choice for building renovation. This device is ideal for processing all mineral-based materials.
and bituminous products with a grain size of up to 2.0 mm by injection or spraying (borehole suspensions, sealing slurries,
Fine plasters, grouting mortar, joint mortar, thick coatings).
Products containing solvents should only be used after consultation with the manufacturer. For pure injection / backfilling, only
a 230 Volt / 50 Hz power connection is required. Depending on the product, a compressor with an air output of 150
ltr (low-viscosity media) up to 400 ltr (thick bitumen coating). A large selection of accessories enables use with
all packer systems available on the market. The material is conveyed via a rotor and stator. The
Delivery rate can be infinitely adjusted from 0.5 to 14 ltr / min. A remote control is optionally available. -
Screw pump BMP 6 230V – Hopper 60 ltr.
BMP6The BMP 6 worm pump is the universal device of choice for building renovation. This device is ideal for processing all mineral-based materials.
and bituminous products with a grain size of up to 2.0 mm by injection or spraying (borehole suspensions, sealing slurries,
Fine plasters, grouting mortar, joint mortar, thick coatings).
Products containing solvents should only be used after consultation with the manufacturer. For pure injection / backfilling, only
a 230 Volt / 50 Hz power connection is required. Depending on the product, a compressor with an air output of 150
ltr (low-viscosity media) up to 4oo ltr (thick bitumen coating). A large selection of accessories enables use with
all packer systems available on the market. The material is conveyed via a rotor and stator. The
delivery rate can be infinitely adjusted from 0.5 to 14 ltr / min. A remote control is optionally available. -
Screw pump BMP 6 Spraying set II
BMP6Suitable for:
Sealing slurries, plasters and other materials up to 1 mm grain size.
