If larger flow rates are required, the BMP 7 screw pump is the right choice. This device is ideal for processing all types of mineral products with a grain size of up to 3.0 mm by injection or spraying (borehole suspensions, Sealing slurries, fine plasters, grouting mortars, anchor mortars, thick coatings, concrete substitutes).

Solvent-containing products should only be used after consultation with the manufacturer.
For filling and injection only electric power supply of 230 or 110 V is needed.
Depending on the product, a compressor with an air output of 150 liters is used for spraying. (low-viscosity media) up to 500 ltr. (thick coating) required.
With an wide range of accesiores it is possible to work with almost any available packer system for mineral products.
Material transport and pressure is created by a rotor inside a stator. The output capacity is steplessly adjustable between 2 up to 20 ltr / min. Remote control cables in different versions are available.

2-speed gearbox – right/left rotation, 30 l hopper, infinitely adjustable, can be dismantled into 3 parts.

Light & Strong: For pumpable materials up to 3 mm grain size
Optionally available:
+ Remote controls
+ Automatic lances
+ mixer DZ 60
Note: An additional compressor is required for spray application.
Air discharge volume depending on material 200 – 500 ltr. / min.
Note: Diameter of material hoses and nozzles and air requirement
are always dependent on the material used.
Scope of delivery: BMP 7 screw pump, material hose 1 “x10m, air hose 11m, mortar sprayer with ball valve