Screw pump BMP 6 – Paint roller set
Suitable for: Facade paints, lime paints, emulsion paints, silicate paints, clay paints… The internally fed roller allows large surfaces to be coated quickly and easily. The BMP 6 paint roller set is particularly suitable for paints with a grain such as clay paints or lime paints.
The equipment for universatile use in the renovation and water proofing is the screw pump BMP 6. This pump is an allround equipment for filling,
injecting or spraying a wide range or products with a grain size up to 2,0 mm such as mineral grouts, bituminous water proofing, fine plasters and renders, joint mortars,
paints and also bituminous thick coatings and epoxy mortars.
Solvent-containing products should only be used after consultation with the manufacturer. For filling and injection only electric power supply
of 230 or 110 V is needed. If spray application is required and additional air compressor for the atomizing air is necessary with an air output between 150 ltr
(fine products) up to 400 ltr (bituminous thick coatings) per min. A selection of accessories is available for the injection
with almost any crack injector on the market. Material transport and pressure is created by a rotor inside a stator. The
output capacity is steplessly adjustable between 0,5 up to 14 ltr / min. Remote control cables in different versions are available.
| Weight | 25 kg |
|---|---|
| max capacity in ltr/min | 14 |
| Max. delivery distance | 30 |
| Max. delivery height | 10 |
| Motor in kW | 1, 8 |
| max. particle size in mm | 2 |
| Max. pressure in bar | 25 |
| Container volume in ltr. | 30 |
Downloads are currently still in development…..
